c3controls

Enclosures

Enclosures starting at only $12.11! Configure below.

Product Resources

Product Features

Available in three rugged constructions: polyester, polycarbonate and die-cast aluminum.
Options up to four holes, or unpunched.
Accommodations available for 22mm and 30mm pilot devices, and disconnect switches.
A variety of seals keep dust and moisture out of the enclosures.
UL Listed and CSA certified.
Note: Design is subject to change without notice. Pictures shown may not represent current design.

Configure Your Item Here

Please configure the product to display product details.

Range of Enclosures

Polycarbonate

Polycarbonate (Optimized for 22mm IEC Devices)

Rugged polycarbonate construction, lightweight with high impact resistance.
Custom fit for use with our 22mm IEC pilot and signaling devices.
UV and corrosion resistant.
Stainless steel hardware including #8 thread form screws.
Enclosure cover is keyed for enhanced safety and to prevent misalignment during installation.
Screw cover accessory, included as standard, to prevent debris build-up.
For easy installation, the enclosure has two (2) lateral M20 conduit entries and two (2) base conduit entries.
Standard Colors: Grey and Yellow
UL Listed Type 1, 2, 3, 3R, 4/4X, 12 & 13
IP66 protection
Operating temperatures from -40 to +55 degrees C (-40 to +131 F)

Polyester

Available for 30mm and 22mm pilot devices.
Solid fiberglass reinforced polyester construction, lightweight with high impact resistance.
Non-conductive double insulated material.
Formed-In-Place (FIP) continuous polyurethane gasket that provides a complete watertight, dust tight environmental seal.
Recessed captive 316 Series stainless steel cover screws.
Designed for general electrical and electronic applications and any application that has an associated environmental concern.
Soft edge design reduces dust and other particle corrosion.
Watertight, non-corrosive environmental design.
UV and chemical resistant.
Punched enclosures feature notched keyholes for both 30mm and 22mm styles.
Standard Color: RAL 7035
Type 1, 2, 3, 3R, 4X, 12, 13 & IP66
RoHS Compliant

Die Cast Aluminum

Available for 30mm and 22mm pilot devices, and disconnect switches.
Die cast aluminum alloy construction.
High temperature neoprene gaskets are oil and petroleum resistant.
Highly efficient seal provides ingress protection against dust and moistures.
Cover gasket is housed in a recess in the lid which mates up with a tongue.
Oil and corrosion resistant.
Stainless steel captive lid retaining screws.
Standard finish: Smooth powder coat grey
30mm & 22mm Enclosures rated Type 1, 3R, 4, 12, IP66 & IP67
Disconnect Enclosures rated Type 4/4X, IP66 & IP67
IP67 protection with a working temperature within -40 to 80 degrees C (-40 to 176 F)